Skip to main content

The main window

Title bar​

At the left, the Production, View and Help menus; in the middle, the production's file name, with a * after it when its setup has changed since it was saved. Drag the bar to move the window, double-click it to maximise.

Preview and programme​

The two big pictures: PVW (preview, edged green) is what goes on air next, PGM (programme, edged red) is what's on air. The source's name is under each.

Beside the programme picture is its audio meter: the master mix's left and right peaks (green up to −18 dBFS, amber to −6, red above), with the momentary loudness (LUFS) under it.

The buttons and the take panel​

Under the pictures:

  • PGM row: cuts that input straight to air.
  • PVW row: puts it on preview.
  • Super rows (S 1, S 2, …): an overlay over programme, kept through cuts and transitions. How many depends on the edition.

Thin dividers separate the input categories (Cameras, Outside Sources, Players, Replays, CG).

Beside them is the take panel: CUT, AUTO (the chosen transition), the transitions and the T-bar. The T-bar moves only when you drag it (or a control surface does) or press its own button; other transitions leave it where it is.

Production panel​

To the right: the workstation name and clock, the ON AIR light, the house clock, and the production's name. The ON AIR light can be switched by hand, by the control API, or automatically (Switcher Settings → General).

Inputs, audio and outputs​

The lower part of the window holds the tabs:

  • Inputs, in category tabs. Click a tile to preview it; double-click it for Quick Play (to preview, restart a clip, and cut to air). Right-click for more (cut, fade, dip, auto, loop…). ⚙ opens the input's settings. The green + adds an input.
  • Audio: the mixer, one strip per input, plus buses.
  • Outputs: where programme (and other feeds) go: NDI, streams, recordings, screens, SDI.

Each input tile has its own audio meter: the input's own sound, before its fader, so a source that's off air still shows a level.

Status bar​

Along the bottom: REC, STREAM, NDI/OMT, SDI, SCREEN and FTB indicators, the engine's health (click it for the engine statistics), and the edition (click it for the licence).